Skip to content

Buying Process

What a Texas home inspection covers — and what the report says it is not

Published 17 October 2026

A brass-bound clipboard on a dark walnut workbench holding a stack of blank cream pages with the top one curled mid-flip, a wooden pencil and a coiled measuring tape in shadow beside it under warm raking light.

The situation

A composite example — not a real family, house or transaction.

A family arrives at Joint Base San Antonio in the middle of a permanent change of station, and the house they have under contract is one they chose from a screen. The option period is short, the way it always is when a PCS calendar is setting the dates, so the inspection happens a few days after the movers unload — boxes still stacked in the garage, one spouse already at work on the other side of town.

The report arrives that evening as an email attachment. It is a form nobody in the house has seen before, and most of it is a checklist. The foundation gets a paragraph. The roof gets a line about where it was viewed from. Then come the letters, and one of them keeps appearing: D.

The problem

The trap is that a clean report and a report full of D items get read as two ends of one scale, and neither read is what the form says. The same document states that a deficiency obligates nobody to repair it, that it is not a code check and not an insurance approval, and that everything in it describes what was visible on one date.

So the questions a household actually needs answered in the days after that email are these: who is allowed to write this report in Texas; what the inspector has to look at and what the inspector is allowed to leave alone; what the four letters on each line mean; and what the report says about itself in the sentences most people never read. Those are the questions with an answer written down, and they are the rest of this page.

What the sources say

A home inspection is the appointment where somebody who does this for a living walks the property and tells you what is visibly wrong with it. In Texas that somebody is licensed, the report has a state form, and the form itself draws the line between what you can rely on and what it never claimed to be.

Who is allowed to inspect a home in Texas

The Texas Real Estate Commission's own guide to the agency says it: real estate inspectors "are individuals licensed by TREC to perform inspections of real property that is part of a real estate transaction. Inspectors provide information on the performance of certain systems that are part of the property. They are required to use the TREC standard report form and are guided by their Standards of Practice to ensure consistency throughout the home inspection process." (Texas Real Estate Commission, "Consumer Guide to the Texas Real Estate Commission", no printed review date, retrieved 16 October 2026.)

The same page separates the three licence levels, and the difference matters when you are choosing:

  • an Apprentice Inspector, "who must be sponsored and directly supervised";
  • a Real Estate Inspector, "who must be sponsored and indirectly supervise"; and
  • a Professional Inspector, who "can inspect without sponsorship or supervision".

One thing TREC says as plainly as it can: it does not set the price. "TREC does not regulate the fees paid to any real estate license holder, including buyer's agents, seller's agents, brokers, inspectors or appraisers. All fees are set by your agreement with each professional." So the inspection fee is a number two people agree on, and this page quotes none.

What the inspection is, in the form's own words

The report form is promulgated by TREC, carries the form number REI 7-6 and the revision date printed on it, and opens with a purpose paragraph worth reading once:

"A real estate inspection is a visual survey of a structure and a basic performance evaluation of the systems and components of a building. It provides information regarding the general condition of a residence at the time the inspection was conducted."

Two words in that sentence do a lot of work. Visual means what could be seen. At the time means the report has a date on it and describes that date. The form then states its own authority: "This inspection is governed by the Texas Real Estate Commission (TREC) Standards of Practice (SOPs), which dictates the minimum requirements for a real estate inspection." (TREC form REI 7-6, revision 8/10/21, as published at trec.texas.gov, retrieved 16 October 2026.)

What the inspector is required to do

The form lists it directly, so this is not a summary of a summary:

  • "use this Property Inspection Report form for the inspection";
  • "inspect only those components and conditions that are present, visible, and accessible at the time of the inspection";
  • "indicate whether each item was inspected, not inspected, or not present";
  • "indicate an item as Deficient (D) if a condition exists that adversely and materially affects the performance of a system or component OR constitutes a hazard to life, limb or property as specified by the SOPs"; and
  • "explain the inspector's findings in the corresponding section in the body of the report form".

What the inspector is not required to do

This half is the one buyers skip, and it is the half that prevents surprises. The same form says the inspector is not required to:

  • "identify all potential hazards";
  • "turn on decommissioned equipment, systems, utilities, or apply an open flame or light a pilot to operate any appliance";
  • "climb over obstacles, move furnishings or stored items";
  • "prioritize or emphasize the importance of one deficiency over another";
  • "provide follow-up services to verify that proper repairs have been made"; or
  • "inspect system or component listed under the optional section of the SOPs (22 TAC 535.233)".

That last line is why a pool, a sprinkler system, a well or a septic system is a separate conversation with the inspector: those sit in section VI of the form, marked optional, and they are inspected only when the agreement says so.

What the report says the inspection is not

On the same form, under report limitations:

  • the report "is provided for the benefit of the named client and is based on observations made by the named inspector on the date the inspection was performed";
  • "ONLY those items specifically noted as being inspected on the report were inspected";
  • it is not "a technically exhaustive inspection of the structure, its systems, or its components and may not reveal all deficiencies";
  • it is not "an inspection to verify compliance with any building codes";
  • it is not "an inspection to verify compliance with manufacturer's installation instructions for any system or component"; and
  • it "DOES NOT imply insurability or warrantability of the structure or its components".

Each of those five lines closes a door that buyers walk into. A clean report is not a code-compliance certificate, is not a warranty, and is not an insurance approval. Where an insurance question actually lives is a different set of documents — see Homeowners insurance in Texas: what a policy actually covers.

The four letters on every line

Each item on the form takes one of four marks: I for inspected, NI for not inspected, NP for not present, and D for deficient. NI and NP are the two a reader should look at twice: not inspected is not the same as fine, and the reason for an NI is worth asking about on the phone while the inspector still remembers the property.

A deficient item obligates nobody to repair it

That sentence is printed twice on the form, in slightly different words. Under the responsibilities of the client: "While items identified as Deficient (D) in an inspection report DO NOT obligate any party to make repairs or take other actions, in the event that any further evaluations are needed, it is the responsibility of the client to obtain further evaluations and/or cost estimates from qualified service professionals regarding any items reported as Deficient (D)." And again in the hazards notice: "The decision to correct a hazard or any deficiency identified in an inspection report is left up to the parties to the contract for the sale or purchase of the home."

The form then gives you the timing advice that matters more than any of it: further evaluations and cost estimates should take place "prior to the expiration of any contractual time limitations, such as option periods." That is the practical instruction. The report tells you which specialists to call; the contract tells you how long you have to call them. The window itself is explained in The option period and earnest money in a Texas contract.

The form also warns you why the second look matters: "Evaluations performed by service professionals in response to items reported as Deficient (D) on the report may lead to the discovery of additional deficiencies that were not present, visible, or accessible at the time of the inspection. Any repairs made after the date of the inspection may render information contained in this report obsolete or invalid."

The hazards the form makes an inspector report anyway

Older houses raise a fair question: if a feature was legal when the house was built, does an inspector have to say anything? On this form, sometimes yes. "Conditions may be present in your home that did not violate building codes or common practices in effect when the home was constructed but are considered hazardous by today's standards. Such conditions that were part of the home prior to the adoption of any current codes prohibiting them may not be required to be updated to meet current code requirements. However, if it can be reasonably determined that they are present at the time of the inspection, the potential for injury or property loss from these conditions is significant enough to require inspectors to report them as Deficient (D)."

The examples the form gives are specific, and they are the kind of thing a walkthrough would miss: "malfunctioning, improperly installed, or missing ground fault circuit protection (GFCI) devices and arc-fault (AFCI) devices"; "ordinary glass in locations where modern construction techniques call for safety glass"; "malfunctioning or lack of fire safety features such as smoke alarms, fire-rated doors in certain locations, and functional emergency escape and rescue openings in bedrooms"; "malfunctioning carbon monoxide alarms"; "excessive spacing between balusters on stairways and porches"; "improperly installed appliances"; "improperly installed or defective safety devices"; "lack of electrical bonding and grounding"; and "lack of bonding on gas piping, including corrugated stainless steel tubing (CSST)".

What the report actually covers, section by section

The form is a map of the house, and reading the map before the appointment is how you decide whether to ask for anything extra:

  • Structural systems — foundations (with the type of foundation named); grading and drainage; roof covering materials and where the roof was viewed from; roof structures and attics, including the approximate average depth of insulation; interior and exterior walls; ceilings and floors; interior and exterior doors; windows; interior and exterior stairways; fireplaces and chimneys; porches, balconies, decks and carports.
  • Electrical systems — the service entrance and panels; branch circuits, connected devices and fixtures, with the type of wiring named.
  • Heating, ventilation and air conditioning — heating equipment and its energy sources; cooling equipment; duct systems, chases and vents.
  • Plumbing — supply, distribution systems and fixtures, including the location of the water meter, the location of the main water supply valve, a static water pressure reading and the type of supply piping material; drains, wastes and vents with the drain piping material; water heating equipment with its energy source and capacity; hydro-massage therapy equipment; gas distribution systems and gas appliances, including the location of the gas meter.
  • Appliances — dishwashers; food waste disposers; range hood and exhaust systems; ranges, cooktops and ovens; microwave ovens; mechanical exhaust vents and bathroom heaters; garage door operators; dryer exhaust systems.
  • Optional systems — landscape irrigation (sprinkler) systems; swimming pools, spas, hot tubs and equipment; outbuildings; private water wells, where the form states "A coliform analysis is recommended"; private sewage disposal systems, with the type of system and the location of the drain field.

An air-conditioning system that is going to be inspected hard is worth its own appointment; what a service visit covers, who in Texas is allowed to do the work, and when to book it are set out in San Antonio AC maintenance: when to book and what a visit covers.

Two attachments to look for on the report

The form states that it "may include an inspection agreement (contract), addenda, and other information related to property conditions", and then draws a boundary: anything under "additional information provided by inspector" or attached to the standard form "IS NOT REQUIRED BY THE COMMISSION AND MAY CONTAIN CONTRACTUAL TERMS BETWEEN THE INSPECTOR AND YOU, AS THE CLIENT. THE COMMISSION DOES NOT REGULATE CONTRACTUAL TERMS BETWEEN PARTIES. IF YOU DO NOT UNDERSTAND THE EFFECT OF ANY CONTRACTUAL TERM CONTAINED IN THIS SECTION OR ANY ATTACHMENTS, CONSULT AN ATTORNEY." In other words: the pages that are TREC's have a floor under them, and the pages that are the inspector's own do not. Read both, and treat them differently.

The sentence a clean report does not entitle you to

A report with no D items means nothing adversely and materially affecting performance, or hazarding life, limb or property, was found in the components that were present, visible and accessible on that date. It does not mean the house is new, or code-compliant, or insurable, or free of conditions that a specialist would find. The form says all of that itself, which is why this page quotes it rather than paraphrasing.

What this page will not do

It quotes no inspection fee, no repair cost and no duration — TREC regulates none of them, and they belong to the agreement you sign. It names no inspector and ranks none. It publishes no defect standard of its own, because the standard that counts is written into the SOPs and the form, and a second one invented here would be worse than useless. It does not characterise a specific report: a report describes one property on one date and is best read with the inspector who wrote it, on the phone. And it does not tell you whether to ask for repairs — that decision belongs to you, your contract and the calendar the contract sets.

Where to go next

Practical next steps

  • Read the limitations page before you read a single finding, so you know what the document claims and what it says it does not.
  • Take the NI and NP lines as seriously as the D lines. Not inspected is not the same as fine, and the reason is worth a phone call while the inspector still remembers the property.
  • Ask the inspector which items they would send to a specialist, and get the cost estimates from those qualified professionals — the form puts that job on the client, not on the inspector.
  • Put every estimate on a calendar against the option period and any other contractual deadline, because your contract, not the report, decides how long you have to act.
  • Write down what you want to ask for and what you are willing to spend before you send anything, so the ask is a decision rather than a reaction to a long document.
  • Treat the pages that are the inspector's own attachments differently from the pages that are TREC's: one set has a regulated floor under it and the other does not.
  • Separate the two documents that arrive in the same weeks: this report is about the condition of the house, and the appraisal and your right to a copy is the lender's collateral question, asked by a different professional entirely.

The takeaway

A Texas inspection report is a dated description of what was visible on one day, written on a form that says so in its own words — which is why the limits are worth reading before the findings.

The Buyer Offer Planner is where a buyer's asks and the money attached to them get organised before they turn into a document; every figure in it is one you typed or a labelled default you can edit. This page is the part before it: what the inspection appointment can and cannot put in front of you.


Tool

Buyer Offer Planner

Every box starts empty, and every figure is yours to enter. We publish no mortgage rate, no tax rate, no insurance price and no market statistic here — the planner only does arithmetic on what you type. Nothing is filled in for you, and no figure is generated. This is educational information, not financial, legal or lending advice.
A · The offer
Quick adjustment
Fills the adjustment box above. It is still your number — change it freely.
B · What you would put in the contract
Earnest money
C · How you would pay for it
Down payment
D · What the home costs to own each month
E · Cash to close, and what you want to pay

Your offer plan

Nothing is calculated yet

Enter the asking price on the home you have in mind, or the price you want to offer, and this column fills itself in. We will not put a price on a home for you, and we will not assume a rate, a tax rate or an insurance premium: every figure comes from a box you filled in.

When a price exists you will see the offer, the option period and deposit deadlines that go in the contract, the monthly cost at your offer next to the asking price, the cash you would need, and anything in your own numbers that contradicts itself.